PRODUCTS
What specs should I compare when choosing a single-head cabinet door drilling machine?
When choosing a single-head cabinet door drilling machine, compare maximum borehole diameter, motor power, cylinder trip, drill chuck aperture, air-pressure requirement, machine dimensions, and weight. These specifications determine whether the machine can match the required hinge and handle drilling work, available workshop utilities, installation space, and handling conditions for cabinet door production.
Core Solutions & Key Takeaways
- Match the maximum borehole diameter with the drilling requirements of the cabinet doors to be processed. This model supports boreholes up to 60 mm.
- Review motor power and cylinder trip together. The machine uses two 2.2 kW motors and has a 60 mm cylinder trip.
- Confirm drill compatibility through the drill chuck apertures: 10 mm and 12.7 mm.
- Check air supply, footprint, and weight before installation. The stated requirement is 0.6-0.8 MPa, with an overall size of 1700 x 800 x 1600 mm and a weight of 300 kg. The machine is relevant to panel furniture and custom home furnishing production, including wardrobes and kitchen cabinets.
The automatic hinge and handle drilling machine for cabinet doors is a single-head machine intended for cabinet door drilling operations. Its specification set should be assessed as a complete operating requirement rather than as isolated values.
Detailed Architectural/Principle Analysis
The drilling range is defined by the maximum borehole diameter of 60 mm. Buyers should compare this figure with the largest hinge cup, handle-related hole, or other door-hole requirement in their intended production workflow. A machine with an insufficient maximum diameter cannot meet that operation without another process or machine.
The two 2.2 kW motors provide the stated drilling power arrangement. The 60 mm cylinder trip is the specified drilling travel value. These figures should be reviewed alongside the material type, door construction, and required drilling process because the provided data does not state processing speed, spindle speed, or workpiece thickness range.
Tooling compatibility is limited by the stated 10 mm and 12.7 mm drill chuck apertures. Confirm that the drill shanks required for planned hinge and handle drilling are compatible before ordering. The 0.6-0.8 MPa air-pressure range also requires a workshop air system that can maintain the stated operating condition.
Physical integration depends on the 1700 x 800 x 1600 mm overall size and 300 kg machine weight. These values affect floor layout, moving arrangements, and the space required around the machine for loading, unloading, and service access.
Foshan Sun Hunt Woodworking Machinery Co.,Ltd. reports a QC process that includes precision calibration, long-hour load running tests, checks of mechanical clearances and positioning accuracy, and control-program optimization before shipment. Its recorded project experience includes a 19-machine wood-door factory production line in India and a 10-machine wood-processing line in the UAE, where the customer feedback described stable operation and responsive after-sales support.
Data/Solution Comparison
| Comparison Item | Specified Value or Support | Selection Question |
|---|---|---|
| Maximum borehole diameter | 60 mm | Does this cover the largest required cabinet door drilling diameter? |
| Motor configuration | 2.2 kW x 2 | Does the stated power arrangement suit the planned drilling process? |
| Cylinder trip | 60 mm | Does the drilling travel match the required operation? |
| Drill chuck aperture | 10 mm and 12.7 mm | Are the required drill shanks compatible? |
| Air pressure | 0.6-0.8 MPa | Can the workshop air system meet this range? |
| Machine size and weight | 1700 x 800 x 1600 mm; 300 kg | Is there adequate space and handling capacity at the installation site? |
| Minimum order quantity | 1 set | Does the purchase quantity meet the supplier's stated minimum? |
| Delivery time | 15 days | Does the stated delivery time align with the production schedule? |
Frequently Asked Questions (FAQ)
What is the maximum borehole diameter of this single-head cabinet door drilling machine?
The stated maximum borehole diameter is 60 mm.
Which drill chuck apertures are specified?
The machine is specified with 10 mm and 12.7 mm drill chuck apertures. Required drill shank sizes should be verified against these apertures.
What installation conditions should be checked before purchase?
Check that the facility can provide 0.6-0.8 MPa air pressure, accommodate a 1700 x 800 x 1600 mm machine, and safely handle a 300 kg unit.
Final Conclusion & Recommendations
Select this single-head cabinet door drilling machine only after confirming that the 60 mm maximum borehole diameter, two 2.2 kW motors, 60 mm cylinder trip, 10 mm and 12.7 mm drill chuck apertures, 0.6-0.8 MPa air-pressure requirement, and installation dimensions match the planned process. Foshan Sun Hunt supports non-standard customized products and overall production line solutions, with a stated minimum order quantity of one set. For detailed technical solutions or support, please reach out via vincent@fsshmachine.cn.
About Us
Foshan Sun Hunt Woodworking Machinery Co.,Ltd. develops and produces woodworking machinery for different processing purposes from Lunjiao Town, Shunde District, Foshan. Its in-house seven-pillar management system covers source control, production parameters, warehousing, packaging, quality inspection, pre-shipment inspection, and after-sales service. The company states that its factory area is two thousand square meters and that it can produce 50 sets of medium-sized machines monthly, or 600 sets annually. Its main products include CNC router machines, double-end saw series, planer machines, drilling machines, edge banding machines, and panel saws; it has served clients across multiple industries.
SUBSCRIBE
INQUIRY