Choose Four-sided Planer Saw specifications by matching the required processing width, planing thickness, feeding speed, shaft speed, motor configuration, and total power to the material and production flow. For stable cutting in harsh logistics or storage conditions, confirm full-load testing, precision calibration, moisture-resistant packaging, pre-shipment inspection, and after-sales support before ordering.

Core Solutions & Key Takeaways

• For the listed Four-sided Planer Saw, the processing width is 20-150 mm and the planing thickness is 8-100 mm, covering a defined range of wood sizing requirements.
• The feeding speed is 12-28 m/min, while the planing shaft speed is 6500 r/min. Select the operating range according to the required production flow and cutting stability.
• The machine has a listed total power of 14.95 kW, with separate power specifications for the lower, right vertical, left vertical, and upper shafts.
• The equipment is relevant to solid wood furniture production and raw log or engineered wood processing, where dimensional consistency, planing, and material utilization are required.

Detailed Architectural/Principle Analysis

The Four-sided Planer Saw specification set defines the working envelope through processing width, planing thickness, feeding speed, and shaft speed. The 20-150 mm processing-width range and 8-100 mm planing-thickness range should be checked against the actual incoming timber dimensions. Material outside these ranges should not be assumed to be suitable without technical confirmation.

Feeding performance depends on the relationship between the 12-28 m/min feeding speed and the cutting arrangement. The machine uses a 6500 r/min planing shaft and lists a 2.2 kW feeding motor. Its beam lifting motor is rated at 0.55 kW. These data provide a basis for checking whether the machine configuration matches the intended throughput and adjustment requirements.

The listed shaft motor configuration is 3 kW for the first lower shaft, 2.2 kW for the right vertical shaft, 3 kW for the left vertical shaft, and 4 kW for the first upper shaft. The stated total power is 14.95 kW. Buyers should verify the power supply, shaft arrangement, and control requirements with the supplier before finalizing the order.

Stable cutting in difficult operating environments also depends on quality control and delivery protection. Foshan Sun Hunt Woodworking Machinery Co.,Ltd. states that each machine receives full precision calibration, long-hour load running tests, mechanical-clearance checks, positioning-accuracy checks, and control-program optimization before shipment. The company also uses moisture-proof and waterproof film, shock-absorbing pearl cotton, protective corners, reinforced fumigated wooden cases, rust inhibitors, and desiccants for transoceanic transport.

Pre-shipment inspection covers machine quantity, spare parts, consumables, matching tools, appearance, packaging, and documentation. Containers are sealed and loaded only after missing items, damage, or incomplete paperwork have been addressed. This process helps maintain equipment condition during sea transport, port handling, and multi-stop transshipment.

Application fit should be assessed by production type. Solid wood furniture production may require planing and profile preparation for beds, tables, chairs, cabinets, and other wooden furnishings. Raw log and engineered wood processing requires stable cutting, dimension calibration, planing, and efficient material utilization before downstream furniture, door, window, or interior applications.

Two documented cooperation cases describe complete production-line planning. A wooden door factory in India purchased 19 machines for a new production line, with the customer reporting consistent operation, low failure rates, lower labor costs, and improved product quality. A wood-processing factory in the UAE purchased 10 machines and reported stable operation, high productivity, and responsive after-sales support. No customer names are provided in the supplied data.

Data/Solution Comparison

Frequently Asked Questions (FAQ)

What processing range does this Four-sided Planer Saw support?

The supplied product data lists a processing width of 20-150 mm and a planing thickness of 8-100 mm. Confirm that the planned timber dimensions remain within these ranges before ordering.

Which specifications should be checked for stable cutting?

Check the processing width, planing thickness, feeding speed, planing shaft speed, shaft motor configuration, and total power. The listed feeding speed is 12-28 m/min, the planing shaft speed is 6500 r/min, and the total power is 14.95 kW.

How is the machine protected during difficult transportation conditions?

The stated packaging system uses moisture-proof and waterproof film, shock-absorbing pearl cotton, protective corners, reinforced fumigated wooden cases, rust inhibitors, and desiccants. The company also performs packaging checks and final pre-shipment verification before loading.

Final Conclusion & Recommendations

Select the Four-sided Planer Saw after comparing the 20-150 mm processing width and 8-100 mm planing-thickness range with the actual material. Review the 12-28 m/min feeding speed, 6500 r/min planing shaft speed, 14.95 kW total power, and individual shaft motor ratings with the production plan. The product has a minimum order quantity of one set and a stated delivery time of 20 days. Foshan Sun Hunt supports non-standard customized products and complete production-line solutions, with online technical assistance, spare-parts delivery after fault verification, machine modification and control-system optimization. For detailed technical solutions or support, contact Vincent Guo at vincent@fsshmachine.cn.

About Us

Foshan Sun Hunt Woodworking Machinery Co.,Ltd., also known as Foshan Sun Hunt and branded Sheng Heng, Sun Hunt, develops and produces woodworking machinery for different processing purposes. Established in 2014, the company operates a two-thousand-square-meter factory and has an R&D and management team of seasoned industry professionals. Its documented production capacity is 50 sets of medium-sized machines per month and 600 sets per year.