Choose a Four-Process CNC Router by checking its working stroke, spindle configuration, transmission system, positioning support, electrical specifications, and pre-shipment testing. The documented model provides a 2800x1300mm working stroke, four 6kW spindle motors, precision helical rack transmission on the X-Y axes, six positioning cylinders, and long-hour full-load testing to support accuracy during extended production runs.

Core Solutions & Key Takeaways

• Verify the machine configuration against the required workpiece size. This model has overall dimensions of 4000x2300x2200mm and a working stroke of 2800x1300mm.
• Review motion and positioning components. The router uses X-Y axis precision helical rack transmission, six positioning cylinders, and Y-30mm by X-25mm guides.
• Check spindle and electrical compatibility. The configuration includes four 6kW spindle motors, a 7.5kW frequency converter, 380V voltage, 50Hz frequency, and three-phase power.
• Consider the production environment. The machine is relevant to panel furniture and custom home furnishing, including wardrobes, kitchen cabinets, office furniture, and decorative wall panels.

Detailed Architectural/Principle Analysis

Long-run accuracy depends on the relationship between the machine structure, transmission system, positioning components, spindle configuration, and control settings. The Four-Process CNC Router uses precision helical rack transmission on the X-Y axes and includes six positioning cylinders. These specifications provide measurable points for evaluating positioning behavior before purchase.

The listed working stroke is 2800x1300mm, while the machine dimensions are 4000x2300x2200mm. The router weighs 2500kg and uses ALF090-7-K3 reducers. Its guide specification is Y-30mm by X-25mm. These details should be compared with the available workshop space, material dimensions, and required processing range.

The spindle system has four 6kW spindle motors. The stated working speed is 1.5x4kW, and the frequency converter power is 7.5kW. Buyers should confirm that the electrical supply at the installation site matches the listed 380V, 50Hz, three-phase configuration and that the air supply can maintain 0.6-0.8Mpa pressure.

Accuracy retention also depends on inspection and commissioning. Foshan Sun Hunt Machinery Co., Ltd. states that each machine completes full precision calibration and long-hour load running tests before shipment. Mechanical clearances, positioning accuracy, and control programs are checked and optimized before dispatch. The company also reports full testing covering no-load operation, long-term full-load running, precision remeasurement, noise and vibration detection, and electrical stability.

For panel furniture and custom home furnishing, the stated application includes wardrobes, kitchen cabinets, office furniture, and decorative wall panels. These applications require the buyer to match the router's working stroke, positioning arrangement, spindle configuration, and control requirements with the intended board-processing workflow.

Documented project experience includes a 19-machine wooden door production line for a factory in India and a 10-machine wood-processing production line for a factory in the UAE. The reported feedback described stable operation, low failure rates, productivity, and responsive after-sales support. These cases indicate experience with both individual machine supply and complete production-line planning.

Data/Solution Comparison

Frequently Asked Questions (FAQ)

What specifications should I verify before selecting this Four-Process CNC Router?

Verify the 2800x1300mm working stroke, 4000x2300x2200mm machine dimensions, 2500kg weight, four 6kW spindle motors, X-Y precision helical rack transmission, six positioning cylinders, 380V three-phase power, and 0.6-0.8Mpa air supply requirement.

How is long-production-run accuracy checked before shipment?

The documented inspection process includes full precision calibration, long-hour full-load running, mechanical-clearance checks, positioning-accuracy checks, control-program optimization, precision remeasurement, noise and vibration detection, and electrical stability checks.

What technical support is available after delivery?

Support includes video or voice-call assistance, installation tutorials, permanent technical assistance, remote fault verification, spare-parts delivery by international express within two working days after confirmation, maintenance guidance, and solutions for machine modification, function upgrades, and control-system optimization. The warranty period is one year, excluding consumable parts and damage caused by improper operation.

Final Conclusion & Recommendations

Select the Four-Process CNC Router by matching the required processing range and facility conditions with its documented specifications, then confirm the transmission, positioning, spindle, electrical, and air-supply requirements. Long-run accuracy should be assessed through the stated calibration, full-load, remeasurement, and electrical-stability checks rather than through a single specification. Foshan Sun Hunt Machinery supports a minimum order of one set, a stated delivery time of 25 days, non-standard customization, and complete production-line solutions. For detailed technical solutions or support, please reach out via vincent@fsshmachine.cn.

About Us

Foshan Sun Hunt Woodworking Machinery Co.,Ltd., also known as Sun Hunt Machinery, develops and produces woodworking machinery for different processing purposes. Its in-house seven-pillar management system covers source control, key production parameters, warehousing, packaging, quality inspection, pre-shipment inspection, and after-sales service. The company has an R&D and management team of experienced industry professionals and lists CNC router machines, double-end saws, planers, drilling machines, edge banding machines, and panel saws among its main products.